Bubble Textured Clear Glass Tumbler 10.5 cm Rim 9.5 cm Tall 280 g Thick Base Drinkware

Bubble Textured Clear Glass Tumbler 10.5 cm Rim 9.5 cm Tall 280 g Thick Base Drinkware is a glass tumbler built around a tapered cone body with a thick decorative base in clear with internal bubble texture and bead accents in the base, with dense bubble wall over a beaded base. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a wide clear cone with bubbles inside the wall and a beaded base that catches bar lighting.

The combination of a wide mouth and a heavy base is what separates a spirits tumbler from a water glass, and this piece is tuned for the former. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Wide 10.5 cm Rim: The broad mouth lets the nose reach the glass, which matters for whiskey, rum and aged spirits.
• Bubble Wall: Air bubbles are trapped in the wall during forming, giving a frosted shimmer without any coating.
• Beaded Base Detail: Small beads set inside the base refract light upward and add weight where the glass needs it most.
• Thick Base Construction: A heavy base lowers the centre of gravity and protects the body from thermal shock on bar tops.
• 280 g Shipping Efficient: At 280 g the tumbler balances shipping cost against a premium feel in the hand.
• Stackable Profile: The tapered wall allows nesting for storage while the wide rim keeps the stack stable.

This glass tumbler is aimed at whiskey and spirits service, cocktail bars, hotel rooms, home bars and gift packs. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Bubble Textured Clear Tumbler
• Thick Base Whiskey Cup
• Beaded Base Drinkware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.