Yellow Bow Embossed Glass Tumbler 9.3 cm Rim 9.9 cm Tall 450 g Thick Base Drink Cup

Yellow Bow Embossed Glass Tumbler 9.3 cm Rim 9.9 cm Tall 450 g Thick Base Drink Cup is a glass tumbler built around a straight wall with a wide 9.3 cm rim and a heavy base in clear with yellow bow relief and yellow rim band, with raised bow relief with a painted yellow rim line. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a large bow in relief across the wall plus a yellow rim band, playful but still commercial.

The bow sits low on the wall so that a full pour still leaves the decoration visible, which matters when the glass is merchandised filled rather than empty. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Bow Relief Decoration: The bow is pressed into the mould in one piece, so the motif cannot peel, flake or wash away in service.
• Yellow Rim Band: A fired yellow band on the rim ties the tumbler to the bow motif and reads clearly from a shop shelf.
• 450 g Heavy Build: At 450 g with an 8.8 cm base the glass sits firmly on the table, which suits wide mouth whiskey and dessert service.
• Wide 9.3 cm Mouth: The broad rim leaves room for ice and bar spoons and lets aroma escape for spirit service.
• Pressed Consistency: Mould pressing keeps wall thickness even across a production run, which makes breakage rates predictable.
• Retail Ready: The clear body with a single colour accent photographs well and needs minimal secondary packaging.

This glass tumbler is aimed at gift retail, cafes and dessert bars, home entertaining and promotional programmes. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Yellow Bow Embossed Tumbler
• Thick Base Pressed Cup
• Clear Drinking Tumbler

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.