Tall Ribbed Clear Glass Tumbler 6.5 cm Rim 14.5 cm Tall 205 g Wide Groove Highball Cup

Tall Ribbed Clear Glass Tumbler 6.5 cm Rim 14.5 cm Tall 205 g Wide Groove Highball Cup is a glass tumbler built around a tall slim body with wide spaced vertical grooves and a small foot in clear and colourless, with broad vertical grooves spaced around the body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a tall slim glass with broad vertical grooves, sized for highballs and long mixed drinks.

The narrow base means the glass should be handled from the body rather than the foot, so staff training and rack design matter more than with a wide tumbler. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• 14.5 cm Tall Body: The height leaves room for ice, mixer and garnish in one pour without overflow.
• Wide Spaced Grooves: Broad grooves improve grip on a slim body and break up the surface for better light refraction.
• 205 g Light Weight: At 205 g the glass cuts freight per container and stays comfortable through long service.
• Compact 4 cm Base: A small foot allows several glasses per tray, which speeds up table service.
• Clear Finish: Colourless glass keeps layered drinks and garnishes fully visible.
• Simple Interior: No internal decoration means fast washing and no residue traps between shifts.

This glass tumbler is aimed at cocktail bars, restaurant beverage service, hotel bars and event hire. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Tall Ribbed Clear Tumbler
• Wide Groove Highball Cup
• Slim Bar Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.