Bubble Glass Tumbler Range Five Colours 7.8 cm Rim 10 cm Tall 250 g Bar Cups

Bubble Glass Tumbler Range Five Colours 7.8 cm Rim 10 cm Tall 250 g Bar Cups is a glass tumbler range built around a tapered body with a narrow rim and rounded shoulder in pink, green, orange, teal and blue green, with dense internal bubble texture. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the five translucent colours on one bubble body, so a venue can colour code service from a single mould.

Colour is sprayed and fired on this body, which keeps each colourway consistent between production runs and easy to reorder individually. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Five Colourways: Pink, green, orange, teal and blue green let a buyer colour code drinks or table zones.
• Internal Bubbles: Bubbles sit inside the wall, so texture and grip never wear off.
• 250 g Light Body: Easy to handle in volume while staying stable once filled.
• Narrow 7.8 cm Rim: A smaller opening concentrates aroma for spirit and aperitif serves.
• Mixed Carton Logic: One mould, five colours, so mixed cartons cover a full colour story.
• Pressed Build: Uniform wall thickness keeps breakage rates predictable for repeat orders.

This glass tumbler range is aimed at cocktail bars, cafes, dessert service and event venues. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Five Colour Bubble Range
• Tapered Glass Tumblers
• Coloured Bar Cups

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.