Colour Block Glass Tumbler Range Four Shades Two Sizes 6.4 cm Rim 270 g Cups

Colour Block Glass Tumbler Range Four Shades Two Sizes 6.4 cm Rim 270 g Cups is a glass tumbler range built around a tapered tall glass and a shorter squat version, both with narrow rims in yellow, green, blue, purple, orange and off white blocks, with solid colour block spray with a clear rim. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the solid colour blocks across two glass heights, sold as a mixed shade range.

Block spraying produces a hard colour edge at the rim, so buyers who want a soft fade should specify a gradient spray instead. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Four Shades: Yellow, green, blue, purple and orange blocks let a buyer build a bright shelf.
• Two Heights: A slim 15 cm glass and a 10 cm short glass cover most cold drinks.
• Clear Rim: An unsprayed rim keeps the drinking edge clean and colour free.
• Light Bodies: 270 g and 220 g keep freight low across a mixed container.
• Mixed Carton Logic: One order covers a full colour story without holding separate SKUs.
• Sprayed Finish: Colour sits outside the glass only, so the drink stays visible and neutral.

This glass tumbler range is aimed at cafes, juice bars, homeware retail and summer promotions. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Colour Block Range
• Two Size Tumbler
• Mixed Colour Cups

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.