Pink Turquoise Bubble Glass Tumbler Pair Two Piece Mixed Colour Bar Cups

Pink Turquoise Bubble Glass Tumbler Pair Two Piece Mixed Colour Bar Cups is a glass tumbler pair built around a slightly tapered body with internal bubbles and a level rim in pink, white and turquoise mixed, with irregular colour swirl with internal bubble texture. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the pink, white and turquoise blended unevenly, so each glass in the pair looks different.

Mixed colour bodies are the hardest to repeat exactly, so buyers wanting matched pairs should order from a single production run. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Mixed Colour Bodies: Pink, white and turquoise are blended so no two glasses match exactly.
• Internal Bubbles: Texture sits in the wall and never wears off.
• Pair Format: Two glasses merchandise as a set and lift retail price per unit.
• Soft Palette: Pastel mixing suits gift and summer ranges better than solid blocks.
• Everyday Shape: A simple tapered body washes quickly and stacks in cabinets.
• Colour Story: Three tones in one pair give buyers flexibility on shelf layout.

This glass tumbler pair is aimed at cocktail bars, gift retail, holiday rentals and home sets. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Pink Turquoise Pair
• Mixed Colour Tumbler
• Bubble Glass Cups

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.