Flute Bubble Champagne Glass 26.5 cm Tall 140 g Seeded Bowl Stemware

Flute Bubble Champagne Glass 26.5 cm Tall 140 g Seeded Bowl Stemware is a champagne flute built around a narrow conical bowl on a thin stem over a 7.5 cm foot in clear with fine suspended bubbles, with seeded bubbles concentrated through the mid bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a narrow flute with seeded bubbles in the mid bowl, which visually reinforces the bead of a sparkling wine.

Seeded flutes are the standard workaround for venues that want visible bead without paying for a cut crystal bowl. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Seeded Mid Bowl: Bubbles sit through the middle of the bowl, where the bead rises, so the effect works with the wine.
• Narrow 4.5 cm Rim: A tight opening preserves the bead better than an open coupe.
• 26.5 cm Height: Full height flute proportions, which is what buyers expect for champagne service.
• 140 g Weight: A light flute aimed at venues pouring by the glass at volume.
• 7.5 cm Foot: The foot is wide relative to the 140 g body, which keeps a full flute stable on a tray.
• Clear Seeded Glass: No spray or tint, so the wine colour and the bead both stay visible.

This champagne flute is aimed at champagne service, wedding toasts, cocktail bars and retail gift sets. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Seeded Champagne Flute
• Bubble Flute Glass
• Tall Champagne Stemware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.