Amber Twisted Martini Glass 20.5 cm Tall 220 g Conical Bowl Stemware

Amber Twisted Martini Glass 20.5 cm Tall 220 g Conical Bowl Stemware is a cocktail glass built around a wide shallow conical bowl on a spiral twisted stem over a round foot in clear with an amber gradient through the bowl, with spiral twist running up the bowl and stem. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a wide cone with an amber wash, built for cocktails that need surface area rather than a narrow bowl.

Wide cone glasses break at the rim more than anywhere else, so buyers should confirm the rim thickness on a sample before committing to a container. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Wide 12.5 cm Cone: Surface area matters for aromatised cocktails, and this is a genuine martini width.
• Spiral Twist: The twist runs from bowl into stem, which is both the visual hook and a grip point.
• Amber Gradient: The warm tone intensifies toward the foot, so clear cocktails still read as coloured.
• 220 g Weight: Substantial for a wide bowl, which is where lighter martini glasses usually fail.
• 20.5 cm Height: Tall enough to look like a cocktail glass without being unstable to carry.
• Wide Foot: A 7 cm foot under a 12.5 cm bowl is the minimum for stability once the glass is filled.

This cocktail glass is aimed at cocktail bars, martini service, dessert presentation and event hire. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Amber Martini Glass
• Twisted Cocktail Glass
• Wide Conical Stemware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.