Swirl Multi Colour Stemmed Wine Glass 24 cm Tall 180 g Painted Bowl Stemware

Swirl Multi Colour Stemmed Wine Glass 24 cm Tall 180 g Painted Bowl Stemware is a stemmed wine glass built around a tapered bowl on a slim stem over a round foot in clear bowl with blue, orange, yellow and green swirls, with coloured swirls fused into the lower two thirds of the bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the soft colour swirls across the lower bowl, leaving a clear band at the rim.

Swirl patterns are the type of decoration buyers either love or reject on a sample, so a pre production sample is worth the freight. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Multi Colour Swirl: Four colours in one bowl give a hand painted look without four separate SKUs.
• Clear Rim Band: The top of the bowl stays clear, so the wine line reads normally in service.
• Fused Not Printed: Swirls are fused into the glass wall, so they do not lift at the edges.
• 180 g Weight: A light body aimed at high volume service rather than premium hand feel.
• 24 cm Height: Standard wine proportions, so it racks with other stemware.
• Individual Variation: Each bowl is drawn separately, so the swirl pattern differs piece to piece.

This stemmed wine glass is aimed at cocktail and wine service in design led venues, colour themed events and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Multi Colour Swirl Glass
• Painted Bowl Stemware
• Coloured Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.