Regency Gold Band Stemmed Glass 22 cm Tall 160 g Triple Trim Bowl

Regency Gold Band Stemmed Glass 22 cm Tall 160 g Triple Trim Bowl is a stemmed glass built around a flared bowl on a slim stem with a gold ring above a gold edged foot in clear glass with gold rim, stem ring and foot edge, with three fired gold bands with a plain bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the three gold lines, at rim, stem and foot, with nothing else on the glass.

Rim gold is the first thing to check on a sample, because a thin band shows any firing defect immediately. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Three Gold Lines: Rim, stem ring and foot edge give the glass a formal reference without pattern.
• Plain Bowl: The bowl stays clear, so the wine remains the focus.
• 160 g Weight: Light enough for banquet volume, where glass is handled by staff.
• 7.3 cm Rim: A moderate opening that suits red and white service.
• Ring Detail: The stem ring covers the joint, which is where a slim stem usually fails.
• Matching Programme: This item pairs with the double band shape for a matched table setting.

This stemmed glass is aimed at wedding and banquet tables, fine dining rooms and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Regency Gold Stemware
• Triple Trim Glass
• Gold Ring Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.