Orbit Gold Rim Stemmed Glass 22.5 cm Tall 190 g Ball Stem Bowl

Orbit Gold Rim Stemmed Glass 22.5 cm Tall 190 g Ball Stem Bowl is a stemmed glass built around a tapered bowl on a stem with a moulded ball node over a 7.5 cm foot in clear glass with a fired gold rim, with plain bowl with a ball node on the stem. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a gold rim over a plain bowl, with a ball on the stem as the only shape detail.

Gold rim glass is normally hand washed or run on a delicate cycle, so the intended service method should be agreed before ordering. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Gold Rim Only: Colour is confined to the rim, so the bowl stays clear for the wine.
• Ball Stem Node: A moulded ball adds a design reference and reinforces the stem joint.
• 8.5 cm Rim: A wide opening that suits aromatic wines and sparkling service.
• 190 g Weight: Light for a 22.5 cm glass, aimed at banquet volume.
• Fired Band: The gold is fired onto the rim, which keeps the line unbroken after washing.
• Matching Programme: This shape complements the other gold rim items in the range for a matched table.

This stemmed glass is aimed at banquet and wedding tables, fine dining rooms and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Gold Rim Ball Stem Glass
• Orbit Stemware
• Gold Edge Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.