Facet Octagonal Rim Stemmed Glass 15 cm Tall 170 g Grey Green Bowl

Facet Octagonal Rim Stemmed Glass 15 cm Tall 170 g Grey Green Bowl is a stemmed cup built around a straight body with an eight sided rim on a short stem and a 7 cm foot in pale grey green, translucent, with faceted rim with a smooth body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the an eight sided rim on a pale grey green body, which reads as cut geometry rather than decoration.

Faceted rims are moulded in one piece, so the facet count and edge sharpness should be checked on an approved sample. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Eight Sided Rim: The faceted rim is the identifying detail and the part a buyer notices first.
• Grey Green Tone: A muted colour that suits neutral and stone table settings.
• 15 cm Format: A short stemmed cup sized for dessert and cocktails rather than wine.
• 170 g Weight: Light enough for volume service.
• Smooth Body: The body stays plain so the faceted rim reads clearly.
• Batch Colour: The tone comes from the glass batch, so repeat orders hold.

This stemmed cup is aimed at cocktail and dessert service, design led venues and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Octagonal Rim Glass
• Facet Stemware
• Grey Green Glass Cup

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.