Lagoon Blue Bowl Green Stem Glass 17 cm Tall 320 g Gradient Cup

Lagoon Blue Bowl Green Stem Glass 17 cm Tall 320 g Gradient Cup is a stemmed cup built around a tapered bowl with a blue gradient on a short ribbed green stem and foot in light to medium blue bowl with a green foot, with gradient bowl with dense vertical ribs on the foot. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a blue gradient bowl sitting on a dense ribbed green foot, two colours joined at the stem.

Two colour glass is joined at the gather, so the boundary position varies slightly between pieces. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Two Colour Join: Blue bowl and green foot are gathered separately, so the join stays crisp.
• Gradient Bowl: The blue deepens toward the stem, which reads as depth rather than a flat tint.
• Dense Ribbed Foot: Ribs run through the whole foot, which is where the 320 g sits.
• 17 cm Format: A short stemmed cup that suits dessert and cocktail service.
• Heavy Foot: A weighted ribbed foot keeps a narrow bowl stable.
• Batch Colour: Both tones come from the batch, so neither fades in service.

This stemmed cup is aimed at cocktail bars, colour themed venues and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Blue Bowl Green Stem Glass
• Two Tone Gradient Cup
• Ribbed Foot Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.