Cloud White Spatter Bowl Glass 19.5 cm Tall 170 g Wide Rim Stemware

Cloud White Spatter Bowl Glass 19.5 cm Tall 170 g Wide Rim Stemware is a cocktail glass built around a wide bowl with a straight rim on a slim stem over a square cut foot in clear glass with irregular white spatter, with white spatter applied in soft irregular shapes. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the white spatter in soft irregular shapes, so the pattern reads as cloud rather than dots.

Soft spatter patterns vary piece to piece by nature; buyers should approve a density standard rather than an exact repeat. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Irregular Spatter: Soft irregular shapes read as cloud, which is a different look to a regular speckle.
• Wide 12 cm Bowl: Surface area for aromatised cocktails and sparkling serves.
• Square Cut Foot: A faceted foot adds grip and a geometric counterpoint to the soft pattern.
• 170 g Weight: Light for a 12 cm bowl, so it stays manageable on a tray.
• Clear Ground: The unsprayed areas stay clear, so the drink remains visible.
• Fired Decoration: The spatter is fired on, so it does not lift at the edges.

This cocktail glass is aimed at cocktail service, dessert presentation, design led venues and retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• White Spatter Glass
• Cloud Bowl Stemware
• Wide Rim Spatter Bowl

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.