Laurel Gold Leaf Relief Glass 20 cm Tall 170 g Double Gold Line Bowl

Laurel Gold Leaf Relief Glass 20 cm Tall 170 g Double Gold Line Bowl is a stemmed glass built around a tapered bowl with a leaf relief band between two gold lines, on a slim stem in clear glass with gold rim and gold lines, with leaf relief band framed by fired gold lines. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a leaf relief band held between two gold lines under a gold rim.

Gold plus relief is the most expensive combination to produce, so buyers usually approve both the gold line quality and the relief depth on one sample. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Leaf Relief Band: Relief is confined to a band, so the glass reads as banded rather than fully patterned.
• Three Gold Elements: Rim plus two gold lines frame the relief, which is what gives the piece its formality.
• 8.8 cm Rim: A wide bowl that suits wine and sparkling service.
• 170 g Weight: Light for a decorated glass with this much gold.
• Fired Gold: Bands are fired onto the glass, so they survive washing without lifting.
• Clear Zones: Undecorated areas stay clear, so the wine remains visible.

This stemmed glass is aimed at banquet and wedding tables, fine dining rooms and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Laurel Leaf Glass
• Gold Relief Stemware
• Gold Line Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.