Anvil Hammered Wine Glass 23.5 cm Tall 246 g 7.5 cm Bowl Stemware

Anvil Hammered Wine Glass 23.5 cm Tall 246 g 7.5 cm Bowl Stemware is a stemmed glass built around a round bowl with a hammered surface on a fine stem over an 8 cm foot in clear, uncoloured, with fine hammered texture across the bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a fine hammered bowl on a slender stem, sized as a wine glass rather than a tumbler.

Textured bowls are the most exposed surface in commercial washing, so buyers should run a wash trial before a container order. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Hammered Wine Bowl: Texture on a stemmed wine glass is less common than on tumblers, which is the point of difference.
• 246 g Weight: Heavy for a 23.5 cm glass, which reads as premium in the hand.
• Fine Stem: The stem is deliberately slim, so balance should be checked on a sample.
• 8 cm Foot: A wide foot under a heavy bowl keeps the glass stable.
• Clear Glass: No tint, so the wine colour stays true.
• Service Durability: A textured face hides scuffs that show badly on a plain bowl.

This stemmed glass is aimed at restaurants, wine bars, tasting rooms and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Hammered Wine Glass
• Anvil Stemware
• Textured Bowl Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.