Light Blue Twisted Glass Tumbler 7.8 cm Rim 10.5 cm Tall 350 g with Floral Applique Decor

Light Blue Twisted Glass Tumbler 7.8 cm Rim 10.5 cm Tall 350 g with Floral Applique Decor is a glass tumbler built around a straight sided body with a softly twisted wall in light blue with white swirl and blue white floral applique, with twisted ribbing with a raised five petal flower. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the soft light blue base with a hand applied flower that gives the tumbler a boutique gift look.

Each flower is positioned by hand, so buyers should expect the small placement variations that distinguish applied glass decoration from printed transfers. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Twisted Wall: The wall carries a gentle spiral twist that catches light and hides fingerprints between polishing cycles.
• Raised Floral Applique: A five petal flower in blue and milk white sits proud of the surface, applied in coloured glass so the detail stays crisp.
• Light Blue Tone: The pale blue body keeps drinks looking fresh and photographs well for ecommerce and social media.
• Comfortable Grip: The twist pattern gives fingers a natural resting place, which matters for guests holding the glass without a coaster.
• 350 g Balanced Weight: A 350 g body with a 5 cm foot keeps the tumbler steady while remaining light enough for volume shipping.
• Gift Ready Finish: The combination of colour, texture and applique means the piece can be sold with minimal secondary packaging.

This glass tumbler is aimed at gift shops, boutique hotels, bridal and baby shower tables, cafes and home kitchen daily use. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Twisted Light Blue Tumbler
• Floral Applique Glass Cup
• Gift Ready Drinkware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.