Cherry Relief Glass Tumbler Range Six Colours 8 cm Rim 10 cm Tall 340 g Cups

Cherry Relief Glass Tumbler Range Six Colours 8 cm Rim 10 cm Tall 340 g Cups is a glass tumbler range built around a straight body with moulded cherry relief and a level rim in clear, lime, aqua, pink, amber and smoke bodies with red and green cherry relief, with moulded cherry and leaf relief filled with colour. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a moulded cherry and leaf relief carried across six body colours.

Relief plus colour fill is produced in the mould and lehr, which keeps decoration cost low compared with hand painting. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Six Body Colours: Clear, lime, aqua, pink, amber and smoke cover both neutral and bright table settings.
• Moulded Cherry Relief: Fruit and leaves are part of the wall, so decoration cannot peel or fade.
• Colour Fill Detail: Red cherries and green leaves sit in the relief, giving depth that print cannot match.
• 340 g Body: Solid enough for daily use while staying economical to ship.
• Wide 8 cm Rim: The opening takes ice and cleaning brushes easily.
• Range Logic: One mould, six colours, so buyers can reorder single shades later.

This glass tumbler range is aimed at homeware retail, cafes, gift sets and seasonal promotions. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Cherry Relief Range
• Six Colour Tumbler
• Embossed Fruit Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.