Cherry Relief Clear Glass Tumbler 8 cm Rim 8.8 cm Tall 300 g Embossed Fruit Drinkware

Cherry Relief Clear Glass Tumbler 8 cm Rim 8.8 cm Tall 300 g Embossed Fruit Drinkware is a glass tumbler built around a straight sided pressed body with a slightly recessed base in clear with red cherry relief and green leaf detail, with raised cherry and leaf relief. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a single red cherry branch in relief that gives plain clear glass a fruit shop character.

Because the motif is moulded, the coloured cherry cannot be rubbed away by sponges, which is the usual failure point of painted fruit designs. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Relief Cherry Motif: The cherry and leaf are pressed into the mould, so the decoration is part of the glass rather than a surface print.
• Clear Body: Colourless glass shows the drink itself, which suits juice, iced tea and layered dessert drinks.
• Compact 8.8 cm Height: A lower profile keeps the centre of gravity close to the table, useful where children or crowded trays are involved.
• 300 g Pressed Weight: Pressed construction gives even wall thickness and predictable breakage rates for volume buyers.
• Easy Stacking: The straight wall and 8 cm rim allow tight pallet stacking without stress marks on the decoration.
• Everyday Dishwashing: Both the clear body and the coloured relief tolerate commercial dishwasher cycles.

This glass tumbler is aimed at juice bars, family restaurants, dessert service, home kitchens and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Cherry Relief Glass Tumbler
• Embossed Fruit Drink Cup
• Clear Pressed Glassware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.