Angled Neck Clear Glass Decanter Slant Mouth Wine Carafe for Table Service

Angled Neck Clear Glass Decanter Slant Mouth Wine Carafe for Table Service is a glass decanter built around a conical body with an offset slanted pouring mouth in clear and colourless, with plain polished surface with a cut slant neck. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a conical decanter cut at an angle so the mouth doubles as the spout.

Slant mouth decanters are made by cutting and polishing the neck after forming, so edge quality is the first thing to inspect on a sample. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Slant Cut Mouth: The angled opening pours without a separate spout and reads as a design statement.
• Conical Body: A tapered form gives surface area for aeration and stacks in storage.
• No Handle Needed: The neck offset lets staff pour one handed from the body.
• Clear Glass: Colourless body keeps wine colour and clarity fully visible.
• Flat Base: A level foot prevents rocking when the decanter is nearly empty.
• Retail Appeal: The angular silhouette photographs well for design led catalogues.

This glass decanter is aimed at restaurants, wine bars, hotel dining and design led retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Angled Neck Decanter
• Slant Mouth Carafe
• Modern Wine Decanter

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.