Hammered Clear Glass Tumbler 8 cm Rim 12.5 cm Tall 290 g Textured Bar Cup

Hammered Clear Glass Tumbler 8 cm Rim 12.5 cm Tall 290 g Textured Bar Cup is a glass tumbler built around a slightly tapered body with a hammered surface and a solid base in clear and colourless, with hammered dimple texture across the body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a clear hammered body at a mid height, the safe choice for water and mixed drinks in hotels.

Hammered clear glass is the most forgiving finish a hotel can specify, because minor chips and scratches disappear into the texture. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Hammered Texture: The dimpled surface masks fingerprints, water marks and light scuffs in daily service.
• Mid 12.5 cm Height: Tall enough for mixed drinks, short enough to stay stable on crowded trays.
• 290 g Weight: A practical balance between freight cost and a solid feel in the hand.
• Clear Body: Colourless glass keeps drink colour and garnish visible for presentation.
• Wide 6 cm Base: A broad foot resists tipping and protects the body from thermal shock.
• Press Made: Uniform wall thickness keeps replacement planning predictable.

This glass tumbler is aimed at hotel bars, restaurant service, cafe groups and home bars. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Hammered Clear Tumbler
• Textured Bar Cup
• Hotel Glass Tumbler

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.