Wavy Rim Clear Glass Tumbler 7 cm Rim 10 cm Tall 290 g Octagonal Base Handmade Look

Wavy Rim Clear Glass Tumbler 7 cm Rim 10 cm Tall 290 g Octagonal Base Handmade Look is a glass tumbler built around a straight wall with a softly undulating rim and a faceted base in clear and colourless, with plain polished wall with a naturally wavy rim. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a hand formed wavy rim over a faceted base, the quiet artisan look buyers use to lift table settings.

The rim variation is deliberate, so quality agreements should measure the rim height tolerance rather than insist on a perfectly level edge. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Wavy Rim Edge: The rim undulates slightly, the signature of hand forming, and gives a soft lip without extra processing.
• Octagonal Base: A faceted base reflects light and adds grip, and it keeps the glass steady on uneven bar tops.
• Near Cylindrical Body: A 7 cm rim over a 7.5 cm base produces an almost vertical wall that suits water, wine and cocktails.
• 290 g Balanced Weight: The glass is light enough for volume orders yet stable once filled.
• Clear Body: Colourless glass keeps the drink as the focus and fits any table linen or menu style.
• Simple Care: A plain interior with no decoration means fast washing and no residue traps.

This glass tumbler is aimed at boutique hotels, wine bars, homeware retail and gift programmes. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Wavy Rim Clear Tumbler
• Octagonal Base Glass Cup
• Handmade Look Drinkware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.