Amber Brown Sprayed Glass Tumbler 7 cm Rim 10.2 cm Tall 310 g Slim Bar Drink Cup

Amber Brown Sprayed Glass Tumbler 7 cm Rim 10.2 cm Tall 310 g Slim Bar Drink Cup is a glass tumbler built around a tapered body with a narrow rim over a compact base in amber brown sprayed finish, with even spray colour with a soft gradient toward the rim. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a warm amber brown spray that reads like aged spirits glass, priced for volume hospitality orders.

The spray is applied in a thin even layer so the glass keeps its transparency, which is what separates a usable amber tumbler from a purely decorative one. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Warm Amber Spray: The colour is sprayed and fired on the outside, so it holds its tone through normal washing instead of fading like a film.
• Slim 7 cm Rim: A narrow opening concentrates aroma and suits spirit and aperitif service rather than plain water only.
• 310 g Weight: A 310 g body with a small 4.5 cm base balances a light hand feel against usable stability.
• Tapered Profile: The wall narrows from rim to base, which keeps the glass comfortable to hold even when condensation forms.
• Clear Interior: Only the outside is coated, so the inside stays colourless and does not affect flavour.
• Stackable Shape: The tapered body nests for storage, which matters where back bar space is limited.

This glass tumbler is aimed at hotel bars, restaurant water service, cafe tables and home bar sets. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Amber Brown Sprayed Tumbler
• Slim Bar Drink Cup
• Warm Tone Glassware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.