Heart Rim Hammered Glass Tumbler 7.5 cm Rim 14 cm Tall 350 g Clear Bar Cup

Heart Rim Hammered Glass Tumbler 7.5 cm Rim 14 cm Tall 350 g Clear Bar Cup is a glass tumbler built around a tapered body with a softly shaped heart outline rim and hammered surface in clear and colourless, with hammered dimple texture across the body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a hammered clear body finished with a soft heart shaped rim, made for gift and dessert service.

Shaped rims need a slower annealing cycle than plain ones, so buyers should expect a slightly higher unit price than a standard tumbler. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Shaped Heart Rim: The rim profile reads as a heart from above, which suits gift and favour programmes.
• Hammered Texture: Dimpling hides fingerprints and light scuffs in daily use.
• Tall 14 cm Body: A highball height that still shows off the rim shape in use.
• 350 g Weight: Solid enough for gift boxing without excess freight cost.
• Clear Glass: Colourless bodies suit any drink colour and photograph well.
• Stable Base: A 6.7 cm foot keeps the shaped rim level on trays.

This glass tumbler is aimed at gift retail, dessert bars, cafes and wedding favours. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Heart Rim Tumbler
• Hammered Clear Cup
• Shaped Rim Glassware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.