Swirl Tumbler Range Four Colourways Tall 15.5 cm Short 11 cm 390 g 360 g Bar Set

Swirl Tumbler Range Four Colourways Tall 15.5 cm Short 11 cm 390 g 360 g Bar Set is a glass tumbler range built around a straight walled tumblers in a tall and a short size per colourway in yellow green, orange white blue, solid light green and blue pink white swirls, with molten swirl colour, pattern varies piece to piece. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the four swirl colourways in matching tall and short pairs, presented as a range card for buyers choosing a palette.

Because swirl patterns shift between gathers, buyers wanting matched sets should order a single production run per colourway rather than mixing batches. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Four Colourways: Yellow green, orange white blue, solid light green and blue pink white cover both neutral and statement table settings.
• Tall and Short Pairing: Each colourway is blown in a 15.5 cm and an 11 cm size so one order fills long drink and spirit positions.
• Individual Swirls: Colour is merged while molten, so every glass carries a different flow and the range reads as hand made.
• 390 g and 360 g Bodies: Substantial weight gives the range a premium feel while staying inside normal container limits.
• Range Card Presentation: The lineup photograph lets distributors select colourways in one decision instead of sampling four times.
• Consistent Mould: All colourways share the same two moulds, which keeps replacement orders and pricing predictable.

This glass tumbler range is aimed at design led bars, concept stores, holiday rentals and home bar ranges. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Four Colourway Swirl Range
• Tall and Short Tumblers
• Hand Blown Look Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.