Gradient Amber Gold Rim Tumbler 7.4 cm Rim 10.5 cm Tall 200 g Tall Spirits Cup

Gradient Amber Gold Rim Tumbler 7.4 cm Rim 10.5 cm Tall 200 g Tall Spirits Cup is a glass tumbler built around a slim tapered body with a fine gold rim line in amber to orange red gradient with gold rim, with gradient spray finish and fired gold rim band. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the an orange red to amber gradient finished with a gold rim line, tuned for premium spirits and gifting.

Because the gradient is sprayed rather than coloured in the melt, buyers get a richer tonal range at a price that still works for high turnover operators. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Amber to Red Gradient: The colour deepens toward the base, which makes clear spirits look rich and warm in the glass.
• Gold Rim Line: A fired gold band on the 7.4 cm rim adds a premium signal at modest cost.
• Light 200 g Body: Low unit weight keeps freight and replacement costs down for large hospitality accounts.
• Slim Hand Feel: A 5.6 cm base under a narrow body gives a balanced grip for sipping rather than long drinks.
• Clear Interior: The inside remains uncoated, so flavour is unaffected and the fill level stays visible.
• Care Note: Hand washing is recommended where gold banding is present, since abrasives dull metallic finishes over time.

This glass tumbler is aimed at hotel bars, restaurant spirits service, gift retail and event table settings. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Gradient Amber Gold Cup
• Tall Spirits Tumbler
• Lightweight Bar Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.