Teal Green Bubble Glass Tumbler 7 cm Rim 11 cm Tall 250 g Curved Body Bar Cup

Teal Green Bubble Glass Tumbler 7 cm Rim 11 cm Tall 250 g Curved Body Bar Cup is a glass tumbler built around a curved body tapering from the rim to a compact base in teal green with gold speckles, with bubble texture with fine metallic speckles. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a teal green body with speckles and bubbles, deep enough to hide ice and garnish marks.

Coloured bodies are sprayed and fired rather than coloured in the melt, so the tone stays consistent between production runs. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Teal Green Tone: The deep green tint reads premium on a back bar and hides smudges between services.
• Metallic Speckles: Fine speckles sit inside the wall and catch light without any surface coating.
• Curved Body: The body swells slightly at the shoulder, which improves grip and softens the silhouette.
• 250 g Weight: Light enough for high volume orders, stable enough once filled.
• 7 cm Rim: A narrow opening suits spirit and aperitif serves as well as water.
• Press Made: Pressed construction keeps wall thickness even for predictable breakage rates.

This glass tumbler is aimed at cocktail bars, hotel lounges, restaurant beverage service and event hire. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Teal Green Bubble Tumbler
• Curved Body Bar Cup
• Lightweight Glass Tumbler

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.