Embossed Clear Glass Tumbler Range Four Patterns 7.7 cm Rim 8.7 cm Tall 240 g Cups

Embossed Clear Glass Tumbler Range Four Patterns 7.7 cm Rim 8.7 cm Tall 240 g Cups is a glass tumbler range built around a short straight body with a level rim and wide base in clear and colourless, with four different embossed surface patterns. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the four embossed patterns on a short clear body, sold as a range for buyers trialling motifs.

Short embossed tumblers sell well in mixed cartons, so case pack planning matters as much as the unit price. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Four Embossed Patterns: Different relief designs let a buyer test motifs without committing to separate moulds.
• Short 8.7 cm Body: A low shape is stable on trays and suits juice, dessert and espresso service.
• 240 g Weight: Light enough for volume orders and economical to ship.
• Clear Glass: Colourless bodies keep the pattern the focus and suit any drink colour.
• Wide 7.5 cm Base: A broad foot resists tipping in crowded service.
• Pressed Consistency: Uniform pressing keeps the relief depth even across the run.

This glass tumbler range is aimed at homeware retail, cafes, gift sets and promotional programmes. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Embossed Clear Range
• Four Pattern Tumblers
• Short Drinking Cups

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.