Patterned Clear Glass Tumbler Range Seven Designs 8.8 cm Rim 10.4 cm Tall 380 g Cups

Patterned Clear Glass Tumbler Range Seven Designs 8.8 cm Rim 10.4 cm Tall 380 g Cups is a glass tumbler range built around a straight cylinder with a level rim and flat base in clear bodies with seven printed or sprayed motifs, with applied pattern designs across the body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the seven pattern options on one cylinder body, giving a retailer a full seasonal wall from a single shape.

Seven designs is usually one more than a retailer needs, so most buyers trim the range after a first season and reorder the strongest three. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Seven Designs: A single body with seven motifs covers several themes and lets buyers test what sells.
• 380 g Weight: Substantial enough for daily use and for gift positioning.
• Cylinder Body: A vertical wall stacks cleanly and washes without trapped corners.
• Clear Base Glass: Plain glass keeps the pattern readable against any drink colour.
• Mixed Cartons: Retailers can order mixed designs in one container instead of holding seven SKUs of stock.
• Range Reordering: Individual designs can be reordered once sell through data is available.

This glass tumbler range is aimed at gift retail, souvenir shops, seasonal promotions and casual dining. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Seven Design Range
• Patterned Clear Tumblers
• Printed Glass Cups

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.