Lavender Grey Twisted Glass Tumbler 9 cm Rim 10 cm Tall 220 g Heavy Base Cup

Lavender Grey Twisted Glass Tumbler 9 cm Rim 10 cm Tall 220 g Heavy Base Cup is a glass tumbler built around a tapered body with a twisted wall and a thick solid base in lavender grey translucent, with twisted spiral relief across the body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a muted lavender grey body with a spiral twist and a thick base, made for modern table settings.

Grey and lavender tints hide condensation and finger marks better than clear glass, which is why they hold up well in cafe service. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Lavender Grey Tone: A desaturated tint that suits contemporary and minimal interiors.
• Twisted Wall: The spiral twists give grip and refract light through the coloured glass.
• Thick Base: A solid foot lowers the centre of gravity and adds a premium feel.
• Wide 9 cm Rim: The opening takes ice and cleaning brushes easily.
• 220 g Body: Light enough for volume freight, heavy enough to feel solid.
• Pressed Build: Uniform walls keep breakage patterns predictable.

This glass tumbler is aimed at cafes, restaurants, hotel lounges and home sets. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Lavender Grey Tumbler
• Twisted Glass Cup
• Heavy Base Tumbler

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.