Straight Bowl Confetti Stemmed Glass Trio Multicolour Speckle Base Stemware

Straight Bowl Confetti Stemmed Glass Trio Multicolour Speckle Base Stemware is a stemmed glass trio built around a straight cylindrical bowl on a pulled stem over a flat foot in clear bowls with orange, blue, yellow, green and red speckles, with coloured frit concentrated around the base of the bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a straight sided bowl with colour gathered at the foot, so the upper bowl stays completely clear.

Because the frit is scattered by hand, colour density varies piece to piece; this is the intended look rather than a defect, and it is worth stating clearly on a retail listing. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Straight Bowl: A cylindrical bowl keeps the surface area even, so the glass looks the same from every angle on a table.
• Confetti Base: Speckles gather in the bottom third, which makes the colour visible through the wine.
• Three Lengths: Staggered heights let a bar set a table with visual variation from a single order.
• Pulled Stem: Stem and bowl are pulled as one piece, which is the strongest construction at this weight.
• Mixed Palette: Five colours in one scatter means the range does not need to be bought in separate colourways.
• Event Ready: Sturdy foot and 170 g body survive the handling that event hire puts glassware through.

This stemmed glass trio is aimed at wine bars, cocktail service, event hire and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Straight Bowl Stemware
• Multicolour Confetti Glass
• Speckle Base Trio

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.