Marbled Swirl Stemmed Glass Range Three Sizes 34.7 cm Tall 410 g Coloured Stemware

Marbled Swirl Stemmed Glass Range Three Sizes 34.7 cm Tall 410 g Coloured Stemware is a stemmed glass range built around a straight sided bowl with a slightly closed rim on a tall pulled stem and a wide foot in light green, orange yellow and off white marbled through the body, with colour swirled into the melt rather than sprayed on the surface. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the colour suspended inside the glass so each piece carries a different swirl.

Marbled glass is a batch process, not a print, so the pattern position differs piece to piece; this is normally presented to retail buyers as a feature rather than a tolerance issue. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Three Heights: 25 cm, 30 cm and 34.7 cm share one rim and foot diameter, so a table can be set with visual variation from a single order.
• Colour In The Melt: The marbled effect sits inside the glass rather than on the surface, so it cannot wear off in a glasswasher.
• Wide 9 cm Foot: A large foot under a 34.7 cm stem is what keeps the tallest piece stable once it is filled.
• 350 to 480 g: The range runs heavy, which suits venues that want a substantial glass in the hand.
• Straight Bowl: A straight wall keeps the marbling readable from every seat at the table.
• Single Swirl Run: Each piece is drawn individually, so buyers should expect variation between units rather than an exact repeat.

This stemmed glass range is aimed at premium restaurant wine service, tasting rooms and design led retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Marbled Swirl Stemware
• Three Height Glass Range
• Coloured Stem Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.