Slim Fluted Stemmed Glass Trio 23.5 cm Tall 180 g Narrow Bowl Range

Slim Fluted Stemmed Glass Trio 23.5 cm Tall 180 g Narrow Bowl Range is a fluted stemware trio built around a narrow straight bowl on a slim stem, plus a short stemless cup in the same wall in clear, uncoloured, with fine vertical flutes running the full bowl height. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a narrow fluted bowl that keeps the wine line high and the glass light in the hand.

Slim stem glassware is bought on the strength of the stem, so buyers should handle a sample rather than judge from photography alone. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Narrow Bowl: A tight bowl concentrates aroma, which suits aromatic whites and lighter reds better than a wide balloon.
• Fine Flutes: Closely spaced vertical flutes break up reflections without adding weight to the wall.
• Three Piece Logic: Two stemmed sizes plus a 10 cm stemless cup let one order cover tasting, service and water.
• 105 g To 180 g: Light enough for high volume service, where glass weight drives breakage and freight cost.
• Slim Stem: A thin pulled stem is the signature of this shape, and it is the part to check on a sample before ordering.
• Tasting Flights: The 25 cm and 23.5 cm pair side by side reads as a flight without needing separate glassware.

This fluted stemware trio is aimed at restaurant wine service, tasting flights and hotel banqueting. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Slim Fluted Stemware
• Narrow Bowl Wine Glass
• Stemless Cup Trio

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.