Amber Twist Stemmed Wine Glass 20.5 cm Tall 200 g Gradient Bowl Stemware

Amber Twist Stemmed Wine Glass 20.5 cm Tall 200 g Gradient Bowl Stemware is a stemmed wine glass built around a tapered bowl on a twisted stem over a round foot in amber graduating from deep at the foot to clear at the rim, with twisted stem with a smooth gradient bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the amber that deepens toward the foot, carried on a twisted stem.

Twisted stems are formed while the glass is still soft, so a small variation in the twist pitch between pieces is normal for this construction. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Amber Gradient: Colour deepens toward the foot, which reads as a warm glow rather than a flat tint.
• Twisted Stem: The twist catches light through the coloured glass and gives the glass a period feel.
• 20.5 cm Height: A shorter stem that suits dessert wine, port and spirits served in a stemmed glass.
• 200 g Weight: A solid piece with a foot heavy enough to offset the bowl.
• Warm Palette: Amber reads well against wood and dark table linens, which suits whisky and cigar programmes.
• Batch Colour: The tone comes from the glass batch, so it holds across repeat orders.

This stemmed wine glass is aimed at whisky and dessert wine service, cocktail bars and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Amber Twist Stemware
• Gradient Amber Glass
• Twisted Stem Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.