Smoke Mottle Stemmed Wine Glass 22.5 cm Tall 220 g Inclusion Bowl Stemware

Smoke Mottle Stemmed Wine Glass 22.5 cm Tall 220 g Inclusion Bowl Stemware is a stemmed wine glass built around a tapered bowl on a pulled stem over a round foot in translucent grey brown mottle with white highlights, with irregular inclusions trapped through the bowl wall. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the dense mottled inclusions that make each bowl read as a one off piece.

Inclusion glass is normally sold as a design feature, but buyers should confirm the acceptable inclusion density on an approved sample before production. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Inclusion Pattern: The mottle sits inside the wall, so the outside of the bowl stays smooth and washable.
• Smoke Palette: Grey brown with white highlights pairs with dark timber, brass and stone settings.
• 220 g Weight: The heaviest single piece in this range, aimed at venues that want presence on the table.
• 22.5 cm Height: A standard wine height, so it still racks and stacks with the rest of a bar's stemware.
• Each Piece Unique: Inclusions form during the gather, so no two bowls match exactly.
• Wide Foot: An 8 cm foot under a 220 g bowl keeps the glass stable through a busy service.

This stemmed wine glass is aimed at design led restaurants, cocktail bars and premium gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Smoke Mottle Stemware
• Inclusion Bowl Glass
• Grey Mottled Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.