Hammered Square Bowl Stemmed Glass 21.5 cm Tall 290 g Frosted Foot

Hammered Square Bowl Stemmed Glass 21.5 cm Tall 290 g Frosted Foot is a stemmed glass built around a soft square bowl with rounded edges on a straight stem over a frosted round foot in clear bowl with a frosted foot, with hammered surface across the bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a soft square bowl with a hammered surface, sitting on a frosted foot.

Squared bowls need a proper divider in the carton, since the corner contacts the pack rather than a smooth wall. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Soft Square Bowl: A squared bowl catches light differently on each face, which suits a table shot.
• Hammered Surface: The hammered pattern breaks up reflections and hides scuffs better than a polished bowl.
• Frosted Foot: A satin foot under a clear bowl gives a deliberate two finish look.
• 290 g Weight: Heavy for a 21.5 cm glass, aimed at venues that want presence.
• Rounded Corners: The square is moulded with rounded corners, which is where a squared glass normally chips.
• Craft Reference: The irregular surface reads as hand blown without the cost of a hand blown bowl.

This stemmed glass is aimed at design led restaurants, cocktail service, whisky bars and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Hammered Square Glass
• Textured Stemmed Glass
• Frosted Foot Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.