Mist Amber Grey Ribbed Glass Set Four Pieces Mixed Colour Stemware

Mist Amber Grey Ribbed Glass Set Four Pieces Mixed Colour Stemware is a stemmed glass set built around a four glasses sharing one tapered bowl and cut groove pattern in three amber and one grey, coloured through the batch, with cut vertical grooves through bowl and foot. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the three amber and one grey, so the set reads as a mixed palette rather than a repeat.

Mixed colourway sets are usually priced as one SKU, so the colour ratio is fixed at production rather than chosen per order. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Mixed Palette: Three amber with one grey is a deliberate mix, which photographs better than four identical pieces.
• Cut Grooves: Grooves are cut into the wall, so the light banding is permanent.
• Batch Colour: Both tones come from the batch, with no coating to wear.
• Set Of Four: A four piece set is the standard retail unit for gift and homeware channels.
• Shared Shape: One bowl shape across the colours keeps the set coherent.
• Volume Packing: Sets of four pack efficiently in a divided carton for container loading.

This stemmed glass set is aimed at bar service, retail gift sets and colour themed table settings. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Amber Grey Glass Set
• Four Piece Stemware Set
• Mixed Colour Ribbed Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.