Slate Speckle Glass Set Six Pieces Grey Black Mottle Mixed Formats

Slate Speckle Glass Set Six Pieces Grey Black Mottle Mixed Formats is a glassware set built around a six pieces covering stemmed bowls and straight tumblers in one mottle in grey black mottled inclusions in clear glass, with molten inclusions flowing through each body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the one mottled inclusion across six formats, so a table can be set from a single glass family.

Buyers should approve an inclusion density standard on a sample, because the spread of the mottle varies between pieces. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Six Formats: Stemmed pieces and tumblers in one mottle, so a full table setting comes from a single order.
• Molten Inclusions: The pattern forms inside the glass, so the outer surface stays smooth and washable.
• Grey Black Palette: A neutral tone that sits with timber, stone and dark ceramics.
• Each Piece Unique: Inclusions form during the gather, so no two pieces match exactly.
• Set Selling: A six piece mixed set lifts the average order value without new tooling.
• Event Ready: The set suits hire fleets that need one look across several formats.

This glassware set is aimed at design led restaurants, bars, event hire and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Slate Speckle Set
• Grey Mottle Glassware
• Six Piece Glass Set

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.