Etch Amber Grid Set Stemmed Glass and Tumbler Two Piece Etched Line

Etch Amber Grid Set Stemmed Glass and Tumbler Two Piece Etched Line is a glass set built around a one stemmed glass with a bulb stem and one straight tumbler, sharing one etched grid in amber yellow with white etched grid lines, with acid etched white grid over an amber body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the white etched grid lines floating over amber glass, across a stemmed glass and a tumbler.

Etched decoration is permanent but visible to the touch, which some buyers use as a quality selling point. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Etched Not Printed: The grid is etched into the surface, so it does not lift or wear off.
• White Line Effect: Etching reads as white line work against amber, which is a cleaner look than a printed grid.
• Two Formats: A stemmed glass and a tumbler cover wine and water from one design.
• Bulb Stem: A rounded stem is easier to grip than a straight one.
• Set Logic: A two piece set lifts the average order value without new tooling.
• Batch Colour: The amber comes from the glass batch, so repeat orders match.

This glass set is aimed at bars, retail gift sets, design led venues and promotional programmes. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Amber Etched Set
• White Line Grid Glass
• Two Piece Glass Set

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.