Twirl Base Swirl Stemmed Glass 22 cm Tall 280 g Multi Colour Lower Bowl

Twirl Base Swirl Stemmed Glass 22 cm Tall 280 g Multi Colour Lower Bowl is a stemmed glass built around a tapered bowl on a pulled stem over a 7.7 cm foot in clear bowl with multi colour swirls in the lower third, with coloured glass twisted into the base of the bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the colour gathered low in the bowl, so the upper glass stays completely clear.

Heavier swirl pieces are usually bought for premium by the glass programmes, where the glass is part of the presentation. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Colour Low In The Bowl: Swirls sit in the lower third, so the top of the glass stays clear for the wine line.
• 280 g Weight: The heaviest swirl piece in the range, which reads as a premium glass.
• Twisted Into Glass: Colour is wound in at the bench, so it cannot peel or fade.
• Four Colours: Blue, orange, purple and green in one piece avoid the need for four SKUs.
• 22 cm Height: Standard service height, so it racks with other stemware.
• Wide Foot: A 7.7 cm foot under a 280 g body keeps the glass stable.

This stemmed glass is aimed at bars, cocktail service, event styling and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Lower Bowl Swirl Glass
• Multi Colour Twirl
• Weighted Swirl Stemware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.