Cancun Green Rim Margarita Glass 13 cm Tall 350 g Coloured Base Bowl

Cancun Green Rim Margarita Glass 13 cm Tall 350 g Coloured Base Bowl is a margarita glass built around a wide shallow bowl on a slim stem with a coloured foot in clear bowl with a green rim and a dark green foot, with plain bowl with fused colour rim and foot. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the colour at the rim and at the foot, with a clear bowl between them.

Coloured rims are the highest wear point on this glass, so buyers should run a wash trial before a bar order. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Coloured Rim And Foot: Colour top and bottom frames a clear bowl, which is a different look to a fully tinted glass.
• 350 g Weight: Heavy for a 13 cm glass, and the mass sits in the foot where it is needed.
• Wide 12 cm Bowl: The broad rim is what a frozen margarita or daiquiri is served in.
• Fused Colour: Rim and foot colour is fused into the glass rather than sprayed on.
• Short Stem: A low glass that handles well on a tray in a busy bar.
• Clear Bowl: The drink colour stays visible, which matters for layered cocktails.

This margarita glass is aimed at cocktail bars, Mexican and frozen drink service, hotel pools and retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Green Rim Margarita
• Coloured Base Glass
• Frozen Cocktail Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.