Cobble Hammered Glass Tumbler
,Short Tapered Glass Tumbler
,185 g Short Glass Tumbler
Cobble Hammered Tumbler 12 cm Tall 185 g Short Textured Glass Cup is a glass tumbler built around a short tapered stemless body with a hammered surface in clear, uncoloured, with hammered texture across the body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a short hammered tumbler, sized for water and spirits rather than long drinks.
Short tumblers are usually nested rather than stacked, so buyers should confirm the stack height they intend to use. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.
Key Features- Short Hammered Body: At 12 cm it suits water and spirits, where a tall tumbler is too much glass.
- Hammered Surface: The texture hides water spots and fingerprints through service.
- No Stem: Removes the most common breakage point in a busy bar.
- 185 g Weight: Solid for a short tumbler, which lowers breakage.
- Grip: A textured face is easier to hold when wet.
- Clear Glass: No tint or print, so repeat orders are simple.
| Parameter | Specification |
|---|---|
| Product Type | Glass Tumbler |
| Material | Soda lime glass, annealed |
| Colour and Finish | Clear, uncoloured |
| Decoration | Hammered texture across the body |
| Rim Diameter | 7 cm |
| Height | 12 cm |
| Base Diameter | 5 cm |
| Weight | 185 g |
| Capacity | To be confirmed per style, sample on request |
| Minimum Order Quantity | 300 pieces per style |
| Delivery Time | 5 to 8 working days for stock styles |
This glass tumbler is aimed at bar service, water service, tasting flights and retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.
In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.
Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.
Packaging and Quality AssuranceEach piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.
Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.
Care and Handling- Hammered Tumbler
- Short Textured Cup
- 12 cm Hammered Glass
Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.
