Sky Blue Bubble Glass Tumbler 10.3 cm Rim 8 cm Tall 410 g Wide Mouth Water Cup

Sky Blue Bubble Glass Tumbler 10.3 cm Rim 8 cm Tall 410 g Wide Mouth Water Cup is a glass tumbler built around a straight wall, low and wide with a broad rim in light sky blue transparent, with dense internal bubble texture. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a low wide sky blue tumbler with bubbles inside the wall, built for water service rather than spirits.

Hotel buyers usually prefer this proportion for breakfast service because a wide base survives trays and bus tubs far better than a tall narrow glass. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Wide 10.3 cm Mouth: The broad rim makes filling and washing quick, which suits high volume water service.
• Sky Blue Body: A soft blue tint keeps drinks looking cool and hides light clouding that appears on clear glass over time.
• Bubble Wall Texture: Bubbles trapped inside the wall add grip and refract light without any surface coating to wear off.
• Low 8 cm Profile: A short wide shape is harder to knock over than a tall tumbler, which reduces breakage in canteen use.
• 410 g Pressed Body: Pressed construction keeps wall thickness even, giving predictable strength across a production run.
• Dishwasher Ready: The interior is smooth and the decoration is internal, so commercial washing is not a problem.

This glass tumbler is aimed at restaurants, canteens, hotel breakfast rooms and family kitchens. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Sky Blue Bubble Tumbler
• Wide Mouth Water Cup
• Coloured Bubble Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.