Flecked Bubble Glass Tumbler Range Five Colours 7 cm Rim 12 cm Tall 440 g Bar Cups

Flecked Bubble Glass Tumbler Range Five Colours 7 cm Rim 12 cm Tall 440 g Bar Cups is a glass tumbler range built around a tapered body with a narrow rim and a heavier base in dark red, white green, pink grey, bright green and orange black flecked finishes, with bubble wall with coloured fleck speckling. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the five flecked colourways on one heavy tumbler body, giving bars a colour coded service option.

Colour coded service is one of the cheapest ways a bar reduces wrong-drink deliveries, which is why flecked ranges sell steadily to on trade accounts. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Five Colourways: Colour coding lets a venue separate drink types or table zones with one glass shape.
• 440 g Heavy Body: The weight is built for tray service and resists knocks in busy rooms.
• Fleck Speckling: Speckles sit inside the wall and mask wear, condensation and fingerprints.
• Tapered Shape: A narrow rim over a wider base balances aroma retention and stability.
• Replaceable Colours: Individual colourways can be reordered as they break, rather than replacing whole sets.
• Service Durability: Pressed construction keeps wall thickness uniform for predictable breakage planning.

This glass tumbler range is aimed at bars, hotel lounges, restaurant service and event hire companies. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Flecked Bubble Range
• Five Colour Bar Cups
• Textured Glass Tumblers

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.