Fuchsia Bowl Green Stem Glass 23 cm Tall 140 g Twisted Stemware

Fuchsia Bowl Green Stem Glass 23 cm Tall 140 g Twisted Stemware is a stemmed glass built around a tapered twisted bowl on a ribbed pale green stem with a ring at the joint in fuchsia pink bowl with a pale green stem and foot, with spiral twist in the bowl with ring detailing. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a fuchsia bowl on a pale green stem, joined with a ribbed ring detail.

Two tone glass is joined at the gather, so the boundary position varies slightly between pieces. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Colour Contrast: Fuchsia over pale green is a deliberate pairing rather than a tinted glass.
• Twisted Bowl: The twist runs through the bowl, so the colour shifts as the glass turns.
• Ring Detail: A ribbed ring covers the joint, which is where two tone stems usually fail.
• 140 g Weight: A light glass aimed at volume service.
• 23 cm Height: Standard wine proportions, so it racks with other stemware.
• Batch Colour: Both tones come from the batch, so neither fades.

This stemmed glass is aimed at cocktail and wine service, colour themed venues and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Fuchsia Bowl Stemware
• Green Stem Glass
• Twist Bowl Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.