Ash Mottle Stemmed Bowl 15.5 cm Tall 190 g Grey Black Inclusion Glass

Ash Mottle Stemmed Bowl 15.5 cm Tall 190 g Grey Black Inclusion Glass is a stemmed bowl built around a wide shallow bowl with inclusions on a short stem over a 7.7 cm foot in grey black mottled inclusions in clear glass, with molten inclusions flowing through the bowl. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the grey black inclusions in a wide bowl, so each piece reads as a one off.

Buyers should approve an inclusion density standard, because the spread of the mottle varies between pieces. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Molten Inclusions: The pattern forms inside the glass, so the outside stays smooth and washable.
• Wide 9.3 cm Bowl: A shallow wide bowl suits dessert and coupe cocktails.
• 15.5 cm Format: A short stemmed bowl rather than a wine glass, which widens the use case.
• 190 g Weight: Solid without being heavy in volume service.
• Neutral Palette: Grey black sits with timber, stone and dark ceramics.
• Each Piece Unique: Inclusions form during the gather, so no two bowls match.

This stemmed bowl is aimed at bars, dessert service, design led venues and gift retail. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Ash Mottle Stemware
• Grey Inclusion Glass
• Wide Mottled Bowl

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.